Session Track
November 03 (Friday)
CAE 및 응용역학부문 포스터
Poster,
3층 로비,
14:10~15:00
- 강건욱(연세대), 강남우(KAIST), 김남근(인천대), 손동우(한국해양대)
Fr16C-58
14:10~15:00
에어 체크밸브의 구조진동해석
Check valves are widely used within the industry to prevent back flow and by doing so protect sensitive components such as pumps or prevent inadvertent draining of tanks. A check valve is a passive component that admits flow in one direction only. An ideal check valve will close exactly when the flow is reversed. However in reality some back flow often occurs and when the valve closes completely a pressure surge or water hammer will result. This pressure surge or water hammer will affect the piping system both through unbalanced forces and increased/decreased internal pressure. The size of pressure surge is largely dependent on the amount of back flow through the valve prior to closing. In this study, we tested noise and vibration. And we analyzed a dynamic behavior of air check valve. First the modal frequency and mode shapes are calculated. And we analyzed a transient response and a frequency response.
Keywords : Check Valve(체크밸브), Pressure Surge(압력 서지), Water Hammer(수충격), Chattering Phenomena(채터링 현상), Dynamic Analysis(동적 해석), Modal Analysis(모드해석), Transient Response Analysis(과도응답해석), Frequency Response Analysis(주파수응답해석), Resonance Avoidance Design(공진회피 설계)
Paper : Fr16C-58.pdf
(사)대한기계학회, 서울시 강남구 테헤란로 7길 22 한국과학기술회관 신관 702호, Tel: (02)501-3646~3648, E-mail: ksme@ksme.or.kr